Pembuatan Bank Sampah Menggunakan Atap Baja Ringan Rangka Waren dengan Material Penyusun Bangunan Limbah Beton di Dusun Kejoyo, Desa Tambong, Kecamatan Kabat, Banyuwangi

Making a Waste Bank Using a Light Steel Roof Waren Frame with Concrete Waste Building Materials in Kejoyo Hamlet, Tambong Village, Kabat District, Banyuwangi

Authors

DOI:

https://doi.org/10.33084/pengabdianmu.v10i1.8387

Keywords:

Light Steel Roof, Garbage Bank, Concrete Waste, Reduce, Reuse, Recycle

Abstract

The Community Self-Help Group (KSM) Istana Sumber Suci, Tambong Village is a Village Revitalization Movement to help reduce waste through recycling plastic waste, which is overwhelmed because it has to collect waste from each household in Tambong Village. Meanwhile, the plastic waste that is collected has not been sorted and is even mixed with other organic materials. This encourages the provision of a Waste Bank (TPS) using a lightweight steel roof to provide facilities in the form of waste sorting infrastructure that can be used by KSM to manage waste. The manufacture of lightweight steel roofs is a novelty because the material is developing and becoming a material that realizes sustainable construction. The main structure in making a waste bank is lightweight steel with a C-channel profile installed according to the Warren truss system, which is a very popular truss structure system and is easy to identify because its construction is in the form of an equilateral triangle. Warren truss has a structure made of equilateral triangles, famous for its ability to distribute the load evenly across different parts. The wall pair uses concrete waste as a material for making up the fill in the waste bank placement so that it can make the construction of the wall faster. The wall pair uses concrete waste divided based on 3 zonings (3R: reduce, recycle, reuse) given a partition to determine the type of waste categorized as plastic, metal, and paper, while organic waste can be used for fertilizer.

Downloads

Download data is not yet available.

References

Khomari, Ghulam, Amin, Hutasoit (2022). Crossing boundaries: Comparison of the Flexural Strength of Reinforced Concrete Beam Using Cold Form Steel Profile as Reinforcement in Osing House. International Research Journal of Advanced Engineering and Science, , 8(1) 27- 30, 2022

Husnah, dkk (2019). Analisis Struktur Rangka Baja Ringan Dan Baja Berat Dengan Aplikasi Bricscad. Jurnal Teknik Sipil, 5(2). https://doi.org/10.31849/siklus.v5i2.3232

Hutasoit, Khomari, (2024). Bantuan Perancangan Atap Kanopi Display UMKM dengan Material Baja Ringan Model Back to Back di Desa Tambong, Banyuwangi. Jurnal J-dinamika, Vol. 9 No. 1 (2024) https://doi.org/10.37824/dbk.v4i2.186

Suriyani (2019). Peran Bank Sampah Dalam Efektivitas Pengelolaan Sampah (Studi Kasus Bank Sampah Malang). Aspirasi 5(1)https://doi.org/10.46807/aspirasi.v5i1.447

Downloads

Published

2025-01-05

How to Cite

Hutasoit, E. O., Khomari, M. G., Rodiyani, M., & Kanom, K. (2025). Pembuatan Bank Sampah Menggunakan Atap Baja Ringan Rangka Waren dengan Material Penyusun Bangunan Limbah Beton di Dusun Kejoyo, Desa Tambong, Kecamatan Kabat, Banyuwangi: Making a Waste Bank Using a Light Steel Roof Waren Frame with Concrete Waste Building Materials in Kejoyo Hamlet, Tambong Village, Kabat District, Banyuwangi. PengabdianMu: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 10(1), 213–222. https://doi.org/10.33084/pengabdianmu.v10i1.8387

Issue

Vol. 10 No. 1 (2025): PengabdianMu: Jurnal Ilmiah Pengabdian kepada Masyarakat

Section

Articles

License

Copyright (c) 2025 Eva Olivia Hutasoit, Mohamad Galuh Khomari, Megalita Rodiyani, Kanom Kanom

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Any article on the copyright is retained by the author(s).
  2. Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share work with acknowledgment of the work authors and initial publications in this journal.
  3. Authors are able to enter into a separate, additional contractual arrangements for non-exclusive distribution of published articles of work (eg, post-institutional repository) or publish it in a book, with acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to and during the submission process, as can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License